Huawei MediaPad M2 fell into the water: what to do?

Whether in the bathroom or in a swimming pool, from time to time your Huawei MediaPad M2 may fall into the water. However, it is not because a phone has fallen into the water that it is necessarily dead. It is certainly possible to restart a Huawei MediaPad M2 that has been dropped in water. To achieve this, it is important to follow certain steps. People often have bad reflexes and this is what can damage the Huawei MediaPad M2. We will first see the steps to follow after the Huawei MediaPad M2 has fallen into the water. We will discover in a second opportunity the common mistakes that most people make.

Steps to follow if your Huawei MediaPad M2 has ever fallen into the water

If you want to be able to recover your Huawei MediaPad M2 while it is running, we recommend that you follow the steps below.

Do not try to turn on the Huawei MediaPad M2 again after taking it out of the water

The first thing to do when the Huawei MediaPad M2 falls into water is to turn off the phone. Unquestionably, if it has never been turned off, just turn it off. If it’s already off, don’t try to turn it back on just yet. In fact, if the Huawei MediaPad M2 is ever turned on and gets wet, it can short circuit and actually toast the phone.

Remove removable components.

When the Huawei MediaPad M2 is out of the water and turned off, it will be necessary to disassemble it as much as possible. This means that, if possible, the case, SIM card, SD card and battery will need to be removed. As soon as it’s okay, dry all of these items and move on to the next step.

Vacuum the water that is in your Huawei MediaPad M2

Using a straw, you have to suck up the water that is on your Huawei MediaPad M2. To do this, you simply need to stick the straw in areas such as the buttons and vacuum. When you think you have sucked all the water out of your Huawei MediaPad M2, you will have to start drying it.

Dry the Huawei MediaPad M2

The fourth step is to dry the phone. To do this, we recommend putting it in front of a fan for several hours. Avoid using techniques that heat the phone, as this can damage it. Once this is done, we recommend that you leave the Huawei MediaPad M2 in rice for 20 to 48 hours. In fact, the rice will absorb the moisture left on the Huawei MediaPad M2.

Replace the components and turn on the Huawei MediaPad M2

When you have completed the above steps, your Huawei MediaPad M2 should be dry. So now you will have the opportunity to try to turn on the Huawei MediaPad M2. In case it does not work, we recommend that you wait a few more days or take the Huawei MediaPad M2 to a repair shop.

What not to do if the Huawei MediaPad M2 has ever fallen into the water

There are several things to do when your Huawei MediaPad M2 falls into water. The first is to try to turn the phone back on immediately afterward. It can destroy the Huawei MediaPad M2. Subsequently, it is extremely inappropriate to use a heat source to dry the Huawei MediaPad M2. Undoubtedly, procedures such as the oven or the hair dryer heat the components and can damage them. Finally, to get the water out of the phone, don’t shake it. Without a doubt, this could also damage the Huawei MediaPad M2.