My Samsung Galaxy Tab S3 screen no longer turns on

Sometimes you want to use your Samsung Galaxy Tab S3 and the screen no longer turns on. When this happens, it is extremely annoying because without a screen, the Samsung Galaxy Tab S3 becomes unusable. This is the kind of annoyance that will need to be resolved relatively quickly. But don’t worry, just because the screen on the Samsung Galaxy Tab S3 no longer works doesn’t necessarily mean it needs to be replaced. So, to help you clear up and fix your screen, we decided to write this article. We will first see what you need to check if the screen of your Samsung Galaxy Tab S3 no longer works. Later we will see what may be the reasons for this concern.

What are the solutions if your Samsung Galaxy Tab S3 screen won’t turn on?

Below are the steps that we recommend you follow to fix your Samsung Galaxy Tab S3 screen.

Make sure your Samsung Galaxy Tab S3 is sufficiently charged

Yes, it is known to be stupid, however it is usually the source of the annoyance. We recommend that you verify that your Samsung Galaxy Tab S3 is properly charged. In fact, it sometimes happens that a mobile suddenly downloads, without being seen to come. So even if you are sure that your Samsung Galaxy Tab S3 was charged before the screen turned off, you should still charge it. In case the screen still does not work, go to the next step.

Do a force restart of the Samsung Galaxy Tab S3

There may be times when your Samsung Galaxy Tab S3 needs to be restarted for the screen to work. To perform a forced restart, you must perform one of the following 2 maneuvers:

• stay a long time press the power button .
• Hold down the button Energy and the button Low volume for about seven seconds.

Once this is done, your Samsung Galaxy Tab S3 will reboot. Thus, you will be able to see whether the screen resets or not. If not, go to the next step.

Make sure the Samsung Galaxy Tab S3 screen does not turn on

It is essential to know if the Samsung Galaxy Tab S3 screen no longer works. Undoubtedly, it is also possible that the annoyance comes from the other side. To check if the screen is not working properly, we invite you to restart your Samsung Galaxy Tab S3 again. If the latter starts, you should feel it. a vibration, hear a noise or the led of the Samsung Galaxy Tab S3 should turn on. In case you notice any of these 3 situations, try that the Samsung Galaxy Tab S3 is booted up fine and it is the screen that is not working. In the event that you do not notice any of these situations, it means that the problem does not necessarily come from the screen.

Change the screen of the Samsung Galaxy Tab S3

In the event that the previous step has allowed you to confirm that it is indeed the screen of the Samsung Galaxy Tab S3 that is not working, it means that it is a hardware problem. If so, unfortunately it will be necessary to change the screen of the Samsung Galaxy Tab S3. For this, we recommend that you go to a specialized store.

What could be the reasons that a screen no longer turns on on a Samsung Galaxy Tab S3?

There can be a number of reasons that can cause a screen to no longer turn on. Different possibilities are shown below.

Has the Samsung Galaxy Tab S3 filled with water or moisture?

This is usually the cause of a screen that is not working properly. In case the Samsung Galaxy Tab S3 has been dropped in the water or recently found in a super humid environment, the annoyance only comes from there. If so, feel free to try warm up a bit your Samsung Galaxy Tab S3 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.

Has the Samsung Galaxy Tab S3 dropped?

In the event that your Samsung Galaxy Tab S3 has recently crashed, or if the screen is cracked, it is likely that the problem comes from there. We recommend that you go to the store to replace the screen.

Are there other signs?

In case your Samsung Galaxy Tab S3 has been doing weird things lately, that was hardly a sign of an operating system problem. Without a doubt, if your Samsung Galaxy Tab S3 turns itself off, restarts itself, or does other weird things, it is because there is a small problem with the operating system. If so, we recommend doing a factory reset of the Samsung Galaxy Tab S3.