The screen of my Umidigi A3 does not turn on anymore

You may want to use your Umidigi A3 and the screen may not turn on. When this happens it is extremely annoying because without a screen the Umidigi A3 becomes unusable. So this is the type of concern that needs to be resolved relatively quickly. But don’t worry, the fact that the screen of the Umidigi A3 no longer works does not automatically mean that it has to be replaced. So to help you clear up and fix your screen, we decided to write this guide. Let’s see what you need to do to get started with your Umidigi A3 display. Later we will see what could be the causes of this problem.

What to do if the screen of your Umidigi A3 does not turn on

Below are the steps that we recommend you follow to repair the screen of your Umidigi A3.

Check that your Umidigi A3 is fully charged

Yes, we know it’s stupid, but it’s often the source of concern. We recommend that you check that your Umidigi A3 is fully charged. In fact, sometimes a phone suddenly discharges without them seeing it coming. Therefore, even if you are convinced that your Umidigi A3 was charged before the screen turned off, you should still charge it. In the event that the screen still does not work, go to the next step.

Do a forced restart of the Umidigi A3

Sometimes it is necessary to force boot your Umidigi A3. If you want to perform a forced restart, you must perform one of the following 2 maneuvers:

• stay a long time press the power button .
• Hold down the button Energy and the button Low volume for about seven seconds.

When it’s ok, your Umidigi A3 will reboot. In fact, you will be able to see if the screen resumes or not. If not, go to the next step.

Check that the screen of the Umidigi A3 does not turn on

It is important to know if the screen of the Umidigi A3 no longer works. In fact, it is also possible that the concern comes from the other side. To check if the screen is not working properly, you will be prompted again to restart your Umidigi A3. Assuming the latter starts, you should feel it. a vibration, hear a noise or the led of the Umidigi A3 should turn on. In the event that you notice one of these three situations, try that the Umidigi A3 is booted up well and the screen does not work. In the event that you do not observe any of these situations, it means that the problem does not necessarily come from the screen.

Change the screen of the Umidigi A3

In the event that the previous step allowed you to confirm that the screen of the Umidigi A3 is not working correctly, this indicates that it is a hardware problem. If so, it will unfortunately be necessary to change the screen of the Umidigi A3. For this, we recommend that you go to a specialized store.

What can be the cause of a screen that no longer lights up on a Umidigi A3

There can be a multitude of causes that can cause a screen to no longer turn on. Different possibilities are shown below.

Did the Umidigi A3 trap water or moisture?

Sometimes this is the cause of a screen that is not working properly. In the event that the Umidigi A3 has been dropped in water or in the event that you have found yourself in an extremely humid environment recently, the concern is that there is little to be gained. If so, is it possible to try warm up a bit your Umidigi A3 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.

Has the Umidigi A3 crashed?

In the event that your Umidigi A3 has recently crashed, or if the screen is broken, it is likely that the problem comes from there. Then it is recommended that you go to the store to have the screen replaced.

Were there other signs?

In the event that your Umidigi A3 has been doing weird things lately, this may have been a sign of a problem with the operating system. In fact, if your Umidigi A3 turns itself off, restarts itself, or does other strange things, it’s probably a problem with the operating system. If so, we recommend doing a Factory Reset of the Umidigi A3.