1. Home
  2. >>
  3. screen
  4. >>
  5. The screen of my Wiko Jerry 3 no longer turns on

The screen of my Wiko Jerry 3 no longer turns on



The screen of my Wiko Jerry 3 no longer turns on


It may happen that you want to use your Wiko Jerry 3 and the screen no longer lights up. When that happens it is really unpleasant because without a screen the Wiko Jerry 3 cannot be used. This is the type of concern that will need to be resolved relatively quickly. But don’t worry, the fact that the screen of the Wiko Jerry 3 no longer works does not necessarily mean that the Wiko Jerry 3 needs to be changed. So to help you see it clearly and fix your screen, we decided to write this post. We will first find out what you need to check if the screen of your Wiko Jerry 3 no longer works. Next, we will find out what could be the reasons for this problem.

What are the solutions if the screen of your Wiko Jerry 3 does not turn on?

Here are the steps you need to follow to repair the screen of your Wiko Jerry 3.

Make sure your Wiko Jerry 3 is sufficiently charged

Yeah, that all sounds pretty bad to me. Looks like BT isn’t for me either. So make sure your Wiko Jerry 3 is properly charged. In fact, it sometimes happens that a smartphone is suddenly discharged, without them seeing it coming. Therefore, even if you are convinced that your Wiko Jerry 3 was charged before the screen turned off, you must still charge it. If the screen still doesn’t work, go to the next step.

Force a reboot of the Wiko Jerry 3

Sometimes you have to force start your Wiko Jerry 3 for the screen to work. If you want to perform a forced restart, you must perform one of the following 2 maneuvers:

When it is ok, your Wiko Jerry 3 will reboot. So you can see if the screen works again or not. If not, go to the next step.

Make sure that the screen of the Wiko Jerry 3 does not turn on

It is important to know if the Wiko Jerry 3 screen no longer works. Of course, it is also possible that the concern comes from the other side. To check if the screen is not working properly, you will be asked again to restart your Wiko Jerry 3. If it ever starts, you should feel a vibration, hear a noise or the led of the Wiko Jerry 3 should turn on. If you notice any of these three situations, it proves that the Wiko Jerry 3 starts up correctly and the screen does not work. If you don’t notice any of these things, it means the concern isn’t necessarily coming from the screen.

Change the screen of the Wiko Jerry 3

If the previous step allowed you to confirm that the screen of the Wiko Jerry 3 is not working correctly, it indicates that it is a hardware problem. In this situation, it will unfortunately be necessary to change the screen of the Wiko Jerry 3. To do this, it is recommended to go to a specialized store.

What could be the reason that a screen no longer lights up on a Wiko Jerry 3?

There can be a number of reasons that can cause a screen to no longer turn on. Different possibilities are shown below.

Did the Wiko Jerry 3 take on water or moisture?

It often happens that this is the cause of a screen that does not work properly. If the Wiko Jerry 3 has fallen into the water or you have been in a very humid environment lately, the concern does not exist. If so, you can try warm up a bit your Wiko Jerry 3 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.

Has the Wiko Jerry 3 fallen?

If your Wiko Jerry 3 has recently crashed, or if the screen is broken, it is possible that the problem comes from there. We recommend that you go to the store to have the screen replaced.

Are there other signs?

If your Wiko Jerry 3 has been doing weird things lately, this could be a sign of the operating system. Undoubtedly, if your Wiko Jerry 3 turns off by itself, whether it restarts itself or does other strange things, it is because there is little to worry about with the operating system. In this situation, it is recommended that you do a factory reset of the Wiko Jerry 3.