The screen of my Wiko Lenny 4 no longer turns on
It may happen that you want to use your Wiko Lenny 4 and the screen no longer lights up. When this happens, it is extremely unpleasant because without a screen, the Wiko Lenny 4 becomes unusable. So this is the kind of problem that will need to be resolved fairly quickly. But don’t worry, the fact that the Wiko Lenny 4 screen no longer works does not necessarily mean that the Wiko Lenny 4 needs to be replaced. So to help you see it clearly and fix your screen, we decided to write this post. We will first see what you need to check if the screen of your Wiko Lenny 4 no longer works. We will see secondly what can be the causes of this malfunction.
What to do if the screen of your Wiko Lenny 4 does not turn on
Below are the steps that we recommend you follow to repair the screen of your Wiko Lenny 4.
Check that your Wiko Lenny 4 is fully charged
Yeah, that all sounds pretty bad to me. Looks like BT isn’t for me either. We therefore recommend that you check that his Wiko Lenny 4 is correctly charged. In reality, it sometimes happens that a mobile phone suddenly discharges, without them seeing it coming. Indeed, even if you are convinced that your Wiko Lenny 4 was charging before the screen turned off, you will still have to charge it. If the screen still doesn’t work, go to the next step.
Do a forced restart of the Wiko Lenny 4
Sometimes it is necessary to force boot your Wiko Lenny 4 for the screen to work. If you want to perform a forced restart, you will have to do one of the following 2 maneuvers:
- stay a long time press the power button .
- Hold down the button Energy and the button Low volume for about 7 seconds.
When it’s done, your Wiko Lenny 4 will reboot. This will allow you to see if the screen is rebooting or not. If this is not the case, continue to the next step.
Make sure that the screen of the Wiko Lenny 4 does not turn on
It is essential to know if the Wiko Lenny 4 screen no longer works. In fact, it is also possible that the annoyance comes from the other side. To check if the screen is not working properly, we invite you to restart your Wiko Lenny 4 again. If it starts, you should feel a vibration, hear a noise or the led of the Wiko Lenny 4 should turn on. If you ever notice one of these 3 situations, it proves that the Wiko Lenny 4 is off to a good start and the screen is not working. If you never notice any of these situations, it means that the concern is not necessarily coming from the screen.
Replace the screen Wiko Lenny 4
If ever the previous step allowed you to confirm that the Wiko Lenny 4 screen is not working properly, it shows that it is a hardware malfunction. In this situation, it will unfortunately be necessary to replace the screen of the Wiko Lenny 4. To do this, we recommend that you go to a specialized store.
What can be the cause of a screen that no longer turns on on a Wiko Lenny 4
There can be a number of reasons that can cause a screen to no longer turn on. Different possibilities are shown below.
Did the Wiko Lenny 4 take on water or humidity?
Sometimes this is the cause of a screen that is not working properly. If the Wiko Lenny 4 has ever fallen into the water or you have been in a super humid environment lately, the annoyance is just that. If so, you can try warm up a bit your Wiko Lenny 4 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.
Has the Wiko Lenny 4 fallen?
If your Wiko Lenny 4 has been dropped recently, or if the screen is cracked, the problem is probably there. Then it is recommended that you go to the store to replace the screen.
Are there other signs?
If your Wiko Lenny 4 has been doing weird things lately, it may have been a sign of concern about the operating system. Indeed, if your Wiko Lenny 4 turns itself off, restarts itself or does other strange things, it is because there is little to worry about with the operating system. In this situation we recommend that you do a Factory Reset of the Wiko Lenny 4.