The screen of my Wiko VIEW XL no longer turns on
Sometimes you want to use your Wiko VIEW XL and the screen does not turn on. When this happens it is very unpleasant because without a screen the Wiko VIEW XL becomes unusable. This is the type of concern that will need to be resolved relatively quickly. But don’t worry, the fact that the screen of the Wiko VIEW XL no longer works does not necessarily mean that the Wiko VIEW XL needs to be changed. So, to help you see it clearly and fix your screen, we have chosen to write this text. We will first see what you need to see if the screen of your Wiko VIEW XL stops working. We will see secondly what can be the causes of this problem.
What to do if the screen of your Wiko VIEW XL does not turn on
Here are the steps you can take to repair the screen of your Wiko VIEW XL.
Check that your Wiko VIEW XL is fully charged
Yeah, that all sounds pretty bad to me. Looks like BT isn’t for me either. We recommend that you check that his Wiko VIEW XL is fully charged. In fact, it sometimes happens that a phone suddenly discharges, without you seeing it coming. So even if you are sure that your Wiko VIEW XL was charged before the screen turned off, it will still need to be charged. If the screen still doesn’t work, go to the next step.
Do a forced restart of the Wiko VIEW XL
There are times when it will be necessary to force start your Wiko VIEW XL for the screen to work. To perform a forced restart, one of the following two maneuvers must be performed:
- stay a long time press the power button .
- Hold down the button Energy and the button Low volume for about seven seconds.
Once this is done, your Wiko VIEW XL will reboot. So you can see if the screen works again or not. If not, go to the next step.
Make sure that the screen of the Wiko VIEW XL does not turn on
It is important to know if the screen of the Wiko VIEW XL no longer works. In fact, it is also possible that the concern comes from the other side. To check if the screen is not working properly, you will be prompted again to restart your Wiko VIEW XL. In the event that the latter begins, you should feel a vibration, hear a noise or the led of the Wiko VIEW XL should turn on. If you see one of these three situations, it proves that the Wiko VIEW XL starts up correctly and the screen does not work. If you do not see any of these situations, this indicates that the problem is not necessarily with the screen.
Replace the screen of the Wiko VIEW XL
If the previous step allowed you to confirm that the screen of the Wiko VIEW XL is not working correctly, it indicates that it is a hardware problem. If this is the case, it will be necessary to replace the screen of the Wiko VIEW XL. For this, it is recommended to go to a specialized store.
What can be the cause of a screen that no longer turns on on a Wiko VIEW XL
There can be a multitude of causes that can cause a screen to no longer turn on. Different possibilities are shown below.
Did the Wiko VIEW XL take on water or moisture?
It often happens that this is the cause of a screen that does not work properly. If the Wiko VIEW XL has fallen into the water or if you find yourself in a very humid environment lately, the concern may be a bit misplaced. In this case, you can try warm up a bit your Wiko VIEW XL with a hair dryer and press hard on the top of the screen. This sometimes repairs the screen.
Has the Wiko VIEW XL been dropped?
If your Wiko VIEW XL has recently crashed, or if the screen is broken, it is likely that the problem comes from there. You are then advised to go to the store to have your screen replaced.
Are there other signs?
If your Wiko VIEW XL has been doing weird things lately, this may have been a sign of a problem with the operating system. Indeed, if your Wiko VIEW XL turns itself off, restarts itself or does other strange things, it is probably a problem with the operating system. If so, we recommend that you do a Wiko VIEW XL factory reset.