The screen of my Condor Griffe T3 no longer turns on
It may happen that you want to use your Condor Griffe T3 and the screen no longer lights up. When that happens it’s super unpleasant because without a screen the Condor Griffe T3 is unusable. This is the type of concern that will need to be resolved relatively quickly. But don’t worry, the fact that the screen of the Condor Griffe T3 no longer works does not necessarily mean that it needs to be replaced. So, to help you see it clearly and fix your screen, we have chosen to write this text. We will first find out what you need to check if the screen of your Condor Griffe T3 no longer works. We will find out later what may be the causes of this concern.
What to do if the screen of your Condor Griffe T3 does not turn on
Below are the steps you can take to start repairing your Condor Griffe T3 screen.
Check that your Condor Griffe T3 is fully charged
Yes, it is known to be stupid, but it is often a cause for concern. Therefore, we recommend that you check that your Condor Griffe T3 is correctly charged. In fact, it sometimes happens that a phone suddenly discharges, without them seeing it coming. In fact, even if you are convinced that your Condor Griffe T3 was charged before the screen turned off, you will have to charge it. If the screen still doesn’t work, go to the next step.
Do a forced reboot of the Condor Griffe T3
Sometimes you have to force boot your Condor Griffe T3 for the screen to work. If you want to perform a forced reboot, you will need to do one of the following:
- stay a long time press the power button .
- Hold down the button Energy and the button Low volume for 7 seconds.
When it’s ok, your Condor Griffe T3 will reboot. So you can see if the screen works again or not. If not, go to the next step.
Check that the screen of the Condor Griffe T3 does not turn on
It is important to know if the Condor Griffe T3 screen no longer works. In fact, it is also possible that the concern comes from the other side. To check if the screen is not working properly, we invite you to restart your Condor Griffe T3 again. If it ever starts, you should feel it. a vibration, hear a noise or the led of the Condor Griffe T3 should turn on. If you notice any of these three situations, it proves that the Condor Griffe T3 is booted well and the screen is not working. If you don’t notice any of these things, it means the concern isn’t necessarily coming from the screen.
Replace Condor Griffe T3 Screen
If the previous step allowed you to confirm that the Condor Griffe T3 screen is not working properly, this indicates that it is a hardware problem. In this situation, it will unfortunately be necessary to replace the screen of the Condor Griffe T3. For this, it is recommended to go to a specialized store.
What can be the cause of the screen no longer turning on on a Condor Griffe T3
There can be a number of reasons that can cause a screen to no longer turn on. Different possibilities are shown below.
Did the Condor Griffe T3 catch water or moisture?
This is usually the cause of a display malfunctioning. If the Condor Griffe T3 has been dropped in water or if you find yourself in a very humid environment recently, there is little concern. In this situation, it is possible to try warm up a bit your Condor Claw T3 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.
Did the Condor Griffe T3 fall?
If your Condor Griffe T3 has been dropped recently, or if the screen is cracked, the problem is probably there. We recommend that you go to the store to replace the screen.
Were there other signs?
If your Condor Griffe T3 has been doing weird things lately, this may be a sign of concern for the operating system. In fact, if your Condor Griffe T3 turns itself off, restarts itself, or does other weird things, there is probably a problem with the operating system. In this situation, it is recommended to do a Factory Reset of the Condor Griffe T3.