The screen of my Wiko Harry 2 no longer turns on
Sometimes you want to use your Wiko Harry 2 and the screen does not turn on. When that happens it is very unpleasant because without a screen the Wiko Harry 2 cannot be used. Therefore, this is the type of problem that needs to be solved relatively quickly. But don’t worry, the fact that the Wiko Harry 2 screen no longer works does not necessarily mean that the Wiko Harry 2 needs to be changed. So to help you see it clearly and fix your screen, we have chosen to write this guide. We will see first of all what to check if the screen of your Wiko Harry 2 no longer works. Later we will see what may be the reasons for this concern.
What to do if the screen of your Wiko Harry 2 does not turn on
Here are the steps you can take to start repairing the screen of your Wiko Harry 2.
Check that your Wiko Harry 2 is fully charged
Yes, it is known to be stupid, however it is usually the source of the problem. We recommend that you check that your Wiko Harry 2 is properly charged. In fact, it regularly happens that a mobile suddenly downloads, without them seeing it coming. So even if you are convinced that your Wiko Harry 2 was charged before the screen turned off, you should start charging it. If the screen still doesn’t work, go to the next step.
Do a forced restart of the Wiko Harry 2
Your Wiko Harry 2 will need to be restarted regularly for the screen to work properly. To perform a forced restart, you must perform one of the following two maneuvers:
- stay a long time press the power button .
- Hold down the button Energy and the button Low volume for seven seconds.
When it is ok, your Wiko Harry 2 will reboot. Thus, you will be able to see whether the screen resets or not. If not, go to the next step.
Make sure that the screen of the Wiko Harry 2 does not turn on
It is important to know if the Wiko Harry 2 screen no longer works. In fact, it is also possible that the problem is the other way around. To check if the screen is not working properly, we invite you to restart your Wiko Harry 2 again. When it starts, you should feel a vibration, hear a noise or the led of the Wiko Harry 2 should turn on. If you notice any of these 3 situations, it proves that the Wiko Harry 2 has had a good start and that the screen does not work. If you do not see any of these situations, this indicates that the problem is not necessarily with the screen.
Replace the screen Wiko Harry 2
If the previous step allowed you to confirm that the screen of the Wiko Harry 2 is not working correctly, it shows that it is a hardware problem. If so, unfortunately it will be necessary to replace the screen of the Wiko Harry 2. To do this, it is recommended to go to a specialized store.
What could be the reason for a screen that no longer turns on on a Wiko Harry 2?
There can be a number of reasons that can cause a screen to no longer turn on. Different possibilities are shown below.
Did the Wiko Harry 2 take on water or humidity?
This is usually the cause of a screen that is not working properly. If the Wiko Harry 2 has fallen into the water or you have been in a super humid environment lately, the problem is not there. In this situation, it is possible to try warm up a bit your Wiko Harry 2 with a hair dryer and press hard on the top of the screen. This sometimes allows the screen to be repaired.
Has the Wiko Harry 2 fallen?
If your Wiko Harry 2 has recently been dropped, or if the screen is cracked, it is likely that the problem comes from there. Then it is recommended that you go to the store to have the screen replaced.
Were there other signs?
If your Wiko Harry 2 has been doing weird things lately, this may be a sign of a problem with the operating system. Indeed, if your Wiko Harry 2 turns itself off, restarts itself or does other strange things, it is probably a problem with the operating system. If so, we recommend that you do a Factory Reset of the Wiko Harry 2.